86 / GR86 / BRZ Anti Dive Relocator Bracket

86 / GR86 / BRZ Anti Dive Relocator BracketThis Gktech 86 GR86 BRZ Anti dive relocator bracket is designed to improve your vehicles suspension handling by relocating the pickup point on the chassis by up to 20mm downwards. This adjustment significantly increases anti dive and stability during braking. Relocated the pickup point on the chassis up to 20mm down to increase anti dive. Anti dive increased from 1. 3% at OEM to 26. 6% Has multiple adjustment shims for tuning optimal anti dive.

but if you don't have one fitted and some dude cuts you off in traffic

with Nissan part number - 32110-CD000

NOTE: Budget version will only suit coilovers with upper camber adjustment and with 60mm spacing from bolt to bolt

as the inlet and outlet ports are 10MM X 1 bubble flare seats and do not require tube nut adapters to directly install tubing with bubble flare 10MM x 1 nuts

We recommend using our adjustable inner tie rods (14mm) which offer more than enough thread either way as seen in the following link

camber gain curves and raised roll centre height

these arms support up to 70 degrees of steering lock on the lead wheel and 65 degrees on the trailing wheel

NOTE#2: If you are running S14/S15 knuckles in your car then you will need the S14/S15 RC correction kit as these are knuckle specific

S14/S15/R33 High clearance caster arms

then the V2 Strut tops would suit as they do NOT require cutting

The GKTECH M12 x 1

Also includes 6mm vacuum line fitting