Heavy Duty for 3.75" ID Silicone Hoses (5-ply)

Heavy Duty for 3.75" ID Silicone Hoses (5-ply)This heavy duty spring loaded T bolt clamp is used on 3 3 4" ID (5 ply) silicone hoses. It is recommended in any air to air application or any application using silicone hoses, especially if you have had trouble with the hose coming off. Spring loaded T bolt clamps assure a firm hold, regardless of the expansion and contraction caused by changes in temperature and pressure. Stainless band and bridge, plated spring and washers, anodized bolt and nut.

This reducing hump hose connects 7" OD and 5" OD intake tubes

This reducing insert adapts a 4" ID intake hose to a 3" OD tube

This reducing 68-degree intake elbow can be used any place where you are connecting a 7" OD tube and a 6" OD tube

and then the 3" intake tube fits in the hole

About 1-1/2 inches on each end goes inside an intake hose (minimum 1 inch)

Use a cobra head anywhere a standard or short-radius elbow will not fit

bolt and nut

Recommended clamps are 94100-0775 on the small end and STBC907L on the big end

Recommended clamps are CT350 on the small end and CT400 on the big end

handles 350F continuous and is perfect for intercooler/aftercooler applications and coolant systems

This hose rated for 350F continuous

This 6" silicone coupler is 2-3/16 inches long