3.5" to 3.25" ID

3.5" to 3.25" IDThis 45 degree silicone elbow is 3 1 2" ID on one end and 3 1 4" ID on the other and can be used anyplace you need a reducing 45 degree bend. Handles 350 F continuous and is perfect for intercooler aftercooler and turbocharger applications. Five ply reinforced silicone for high strength. We now recommend all silicone elbows be 5 ply or better. Thick 7 32" wall construction. Full 6" leg lengths. Recommended clamps are 94100 0362 on the small end and

482°F Operating Pressure 3000 PSI

When a 90 degree elbow is not sharp enough

where fluid systems are required to challenge intense pressures

Fits most Ford throttle bodies and MAF's and adapts to 3-1/2" tubing

Each of the bundles you see in the item consists of 3000 tiny fibers of pure carbon

Recommended clamps are 94100-0338 and 94100-0388

5"ID)- $22

2-1/2" OD aluminum 45 degree elbow

This 4-1/2" OD aluminum elbow is used in air intake systems

-94°F Maximum Temperature 250°C

42lbs Internal Material (Core) PTFE External Material (Overbraid) Stainless Steel - 303/304 External Material (Outer) Nylon Braid (Black) Minimum Temperature -70°C

7" leg lengths